Treat yourself to the ease and convenience of our Dual Magnet Swivel Mount. This easy-to-use dash mount attaches to your dash or any smooth surface with strong 3M VHB. The super grip rubber face and super strong neodymium magnets keep your phone on the mount and not on the floor. Adjust your phone to the perfect viewing angle with 360-degree rotation via the CNC-machined aircraft aluminum swivel. The fully adjustable head features an array of MagSafe® compatible magnets along with a heavy-duty center magnet that works with all MagSafe® compatible phones & cases and all ROKFORM magnetic cases.
- Super grip face magnetically secures phone
- Installs with easy to use residue-free adhesive
- View calls, text, and GPS handsfree
- Secures your phone at the perfect angle
- Low profile design looks great on any dash
The ROKFORM Dual Magnet Swivel Mount allows you to safely and securely keep your phone out of your hands and in clear view. Its low-profile design, small footprint mounting area and superior adjustability allows for the perfect view of your phone in almost any car, truck, or SUV.
Enjoy a clear view of your phone without having to take your eyes off the road and while keeping your hands on the wheel. The Dual Magnet Swivel Mount makes your phone an extension of your vehicle, quickly glance at maps, incoming calls, texts and more just like you glance at the speedometer when you might be going too fast to work ;-)
The small mounting footprint allows for a truly universal mount that can be securely placed on almost any dash. With near infinite adjustability you can adjust your phone to the perfect viewing angle without cluttering up your dash or sacrificing valuable dash space. When using a ROKFORM case for the Apple iPhone or Samsung Galaxy, the magnet-to-magnet connection guarantees a fast, easy, and secure mount. Don’t have a ROKFORM case? Try our Universal Adapter and enjoy magnet to magnet security on almost any phone or case. Changing cars? The ultra-strong, 3M® VHB® adhesive is designed to hold strong to your dash and also be removed without harming the surface below. Replacement adhesive Pads can be purchased at a nominal cost so you can easily mount your Dual Magnet Swivel Mount in your next vehicle.
With an ultra-strong Neodymium magnet and a super grip face the ROKFORM Dual Magnet Swivel Mount keeps your phone secure and at the ready. The ROKFORM Dual Magnet Swivel Mount even looks good without a phone. Unlike bulky plastic clamps, claws and contraptions that can block your view or fill your cupholder the Swivel dash mount is made from premium materials that blend into your controls, isn’t an eyesore and does not limit your vehicles functionality.
With hundreds of 5-Star verified reviews you don’t even have to take our word for it. The Dual Magnet Swivel Mount is trusted by thousands of customers to safely and securely keep their phone right where they need it most.
With a two-year warranty and a 60-day money-back satisfaction guarantee there is virtually no risk in trying the ROKFORM swivel dash mount for yourself. We put our money where our mouth is and our 5-Star Customer Service Team, based at our headquarters in California, is always ready to help. If it's a warranty replacement, spare part, question, or anything in between, our goal is to make every customer a customer for life. If you are the original purchaser of our product and have a problem, call us, and we will fix it. Give us a try and see or run on over and visit us in our showroom!
- Height = 46.7mm, Max Width = 36.5mm
- 3mm x 25mm
- 1.9 oz
- Make sure the dash or other area you are sticking the Swivel mount to is clean and dry. We include an alcohol wipe that works perfect but if your dash has a protective coating like Armor All or grease and dirt build up, you will need to use soap and water first to thoroughly remove any grease, grime, dirt or dust from the dash. Once is it really clean, use the wipe to remove any soap or other contaminants from the cleaning you just did. The cleaner the surface, the better the swivel mount will stick. If you skip this step, it likely won’t stick at all so please do not skip this very important step.
- Stick the mount to your newly cleaned area and hold with firm pressure (at least 15psi) for 60 seconds.
- After application, the bond strength will increase as the adhesive flows onto the surface. At room temperature, approximately 50% of the ultimate strength will be achieved in 20 minutes, 90% after 24 hours and 100% after 72 hours. We recommend that you wait at least 24 hours before using your mount. If you followed steps 1 and 2 properly and wait at least 24 hours, you will enjoy trouble free use until you decide to remove the mount. If you followed these instructions exactly and are still having trouble, please call us at 855-765-3676 and we will help you find a solution.
- More than likely the surface was dirty, not enough pressure was applied, and or it was used before the 24-hour cure-time. If this happens, please call us and we can send you a replacement adhesive and some extra cleaning wipes, no charge. 1-855-765-3676.
- Even though the 3M™ VHB™ tape is extremely strong it can still be removed without damaging the surface below. The mount can be removed by using dental floss or fishing line underneath the mount to partially break the adhesive free and get it started. Once a small area is broken free you can peel the mount off of the surface at an angle. Do not pull straight out, peel at an angle and the mount will come off with the adhesive. If a small amount of adhesive is left over on the surface, you can peel it off with your fingernail and then wipe the surface clean with an alcohol wipe.
- VHB™ Stands for “very high bond” and it is a type of tape that consists of a durable acrylic adhesive with a foam core. We use 4941 for its strength and ability to adhere to a wide variety of materials such as metal, glass, plastic and more. It is temperature resistant up to 200 F so when your Swivel mount is installed it will still hold your phone in the Summer heat.
- Yes, we can provide you with replacement adhesive if you happen to remove the mount for a different location of vehicle. Please call us at 1-855-765-3676 for replacements.
- The Swivel dash mount is made of Aluminum and features a TPU face for gripping your phone.
- Yes, they do work but not as good as when using a ROKFORM case with magnet. The steel plates included in the kit are magnetic, but they are not magnets, so the grip is not as good. You can also purchase additional replacement steel plates here.
- No, it does not include a magnet for your case. The Swivel mount does include 2 steel plates that can be adhered directly to your phone or non-ROKFORM phone case. The performance, however, will not be as good as with a genuine ROKFORM Magnetic case.
- NO. ROKFORM Pioneered magnetic technology in the Mobile Electronics Accessory Space back in 2011 and now even Apple® has adopted magnetic technology in their phones and accessories, even cases. Our specially designed rare earth magnets are proven safe for all smartphones and tablets. Magnets are safe for your phone and your credit cards, but direct contact can damage other magnetically sensitive products or devices such as floppy discs, hotel keys, and spinning hard drives. Do not use if you have an implanted device.
- No. The magnet does not affect the phone signal, GPS, Bluetooth, or Wi-Fi.
- TPU (Thermoplastic polyurethane) is a form of plastic that can be hard or soft and is known for its elasticity and resistance to oil grease and abrasion. We use 85D TPU on our swivel mount to provide grip to hold your phone.
- The case is designed, tested, and shipped to you from Irvine, California, and manufactured in China.
- Yes, the magnet connection is plenty strong to hold the larger phones and the swivel adjustment is designed to stay in place once adjusted to your desired angle, even with heavy phones.
- No worries. We offer a 60-day money-back guarantee. If you don't like it, send it back for a full refund or exchange — your choice.
- We have a two-year warranty and a 60-day money-back satisfaction guarantee. Our 5-Star Customer Service Team, based at our headquarters in Orange County, California, is always ready to help. If it's a warranty replacement, spare part, question, or anything in between, our goal is to make every customer a customer for life. If you are the original purchaser of our product and have a problem, call us, and we will fix it. Give us a try and see or run on over and visit us in our showroom!
⚠️ WARNING: Cancer and Reproductive Harm - https://www.p65warnings.ca.gov
Your Privacy Choices